Keinun vaatimustenmukaisuuden arviointi
Leivo, Johannes (2017)
Leivo, Johannes
2017
Ympäristö- ja energiatekniikka
Teknis-luonnontieteellinen tiedekunta - Faculty of Natural Sciences
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Hyväksymispäivämäärä
2017-05-03
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:tty-201704201318
https://urn.fi/URN:NBN:fi:tty-201704201318
Tiivistelmä
Tässä työssä tarkoituksena oli osoittaa Suomen Voimistelutuotteen keinun vaatimustenmukaisuus ja CE-merkitä kyseinen keinu. Lisäksi haluttiin tarkastella, että keinu täyttää myös syöttötuolin istuinosalle asetetut vaatimukset, sillä keinua on tarkoitus käyttää myös osana syöttötuolia. Työstä jää myös dokumentti, jonka avulla vaatimustenmukaisuuden osoittaminen ja CE-merkintä ovat jatkossa helpompi tehdä.
Selvitys päätettiin tehdä, sillä keinu pitää CE-merkitä ennen markkinoille viemistä ja Suomen Voimistelutuotteella ei ollut resursseja, eikä osaamista tähän. Heillä on myös jatkossa tarkoitus tuoda CE-merkittäviä tuotteita markkinoille, joten prosessi merkinnän saamiseksi katsottiin olevan hyvä selvittää, että myöhemmin merkintää tarvitsevat tuotteet on helpompi merkitä.
Tutkittavalle keinulle suoritettiin standardin mukaiset testit ja tehtiin muut CE-merkintään vaadittavat toimenpiteet. Tulosten perusteella tutkittu keinu on vaatimusten mukainen ja se voitiin CE-merkitä. Lisäksi keinu täytti syöttötuolin istuimelle asetetut vaatimukset. Prosessi CE-merkinnän saamiseksi saatiin dokumentoitua ja avattua niin, että Suomen Voimistelutuote voi jatkossa tehdä merkintään vaadittavat toimenpiteet itsenäisesti. CE marking is mandatory for all swings before they can be sold in EU. The aim of this study was to ensure the conformity of Suomen Voimistelutuote’s swing so that the CE marking can be affixed to the swing. In addition, conformity with the requirements of a high chair was assessed, as the swing will also be used as a seat of a high chair.
Suomen Voimistelutuote did not have the resources or expertise to carry out all the required steps of assessment. Their intention is to sell similar products that require CE marking in the near future. Therefore, it is important to find out and document the procedure for obtaining the CE marking. Hence, it will be easier to affix the CE marking to the products that need it. In the future, the results of this study will help the company to assess the conformity of their products and to put CE marking into the similar products.
Tests in accordance with the standard and other required steps to obtain the CE marking were carried out for the swing. On basis of the results, the swing conforms with the requirements and therefore it is possible to affix the CE marking. Swing also meets the requirements of a high chair. The procedure and steps for obtaining the CE marking was documented and explained successfully so that Suomen Voimistelutuote is able to do the required steps and measures independently in the future.
Selvitys päätettiin tehdä, sillä keinu pitää CE-merkitä ennen markkinoille viemistä ja Suomen Voimistelutuotteella ei ollut resursseja, eikä osaamista tähän. Heillä on myös jatkossa tarkoitus tuoda CE-merkittäviä tuotteita markkinoille, joten prosessi merkinnän saamiseksi katsottiin olevan hyvä selvittää, että myöhemmin merkintää tarvitsevat tuotteet on helpompi merkitä.
Tutkittavalle keinulle suoritettiin standardin mukaiset testit ja tehtiin muut CE-merkintään vaadittavat toimenpiteet. Tulosten perusteella tutkittu keinu on vaatimusten mukainen ja se voitiin CE-merkitä. Lisäksi keinu täytti syöttötuolin istuimelle asetetut vaatimukset. Prosessi CE-merkinnän saamiseksi saatiin dokumentoitua ja avattua niin, että Suomen Voimistelutuote voi jatkossa tehdä merkintään vaadittavat toimenpiteet itsenäisesti.
Suomen Voimistelutuote did not have the resources or expertise to carry out all the required steps of assessment. Their intention is to sell similar products that require CE marking in the near future. Therefore, it is important to find out and document the procedure for obtaining the CE marking. Hence, it will be easier to affix the CE marking to the products that need it. In the future, the results of this study will help the company to assess the conformity of their products and to put CE marking into the similar products.
Tests in accordance with the standard and other required steps to obtain the CE marking were carried out for the swing. On basis of the results, the swing conforms with the requirements and therefore it is possible to affix the CE marking. Swing also meets the requirements of a high chair. The procedure and steps for obtaining the CE marking was documented and explained successfully so that Suomen Voimistelutuote is able to do the required steps and measures independently in the future.