Magnetomechanical Model for Hysteresis in Electrical Steel Sheet

Singh, Deepak; Martin, Floran; Rasilo, Paavo; Belahcen, Anouar (2016)
 
Avaa tiedosto
Lataukset: 



Singh, Deepak
Martin, Floran
Rasilo, Paavo
Belahcen, Anouar
2016

IEEE Transactions on Magnetics
7301109
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
doi:10.1109/TMAG.2016.2590384
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:tty-201608054393

Kuvaus

Peer reviewed
Tiivistelmä
A coupled magneto-mechanical model for hysteresis in an electrical steel sheet is presented. The foundation of the model developed is the classical Sablik-Jiles-Atherton (SJA) model. A comprehensive model for the stress dependent magnetostriction is also proposed and implemented in the SJA model. Improvements in the SJA model as well, are proposed and validated with simultaneous measurements of magnetostriction, magnetic field and flux density. The measurements were performed on a single electrical steel sheet under various levels of stress (-35 MPa to 100 MPa). The proposed model was found to adequately model the permeability change and the local bowing of the BH-loop due to stress.
Kokoelmat