Experimental investigation on the tension lap splices used in the joints of precast RC foundation piles

Abstract

Abstract The joints between precast reinforced concrete pile segments in deep foundations are typically mechanically lockable. They include anchor bars embedded inside the ends of each segment, forming lap splices with the main bars. Because of their particular technology, these lap splices are somewhat different from traditional lap splices, as shown in the first part of this paper, where the impact of their specific characteristics on the tensile behavior of the joints is discussed. The experimental section presents the results of 19 tensile tests on these lap splices and compares them with established theoretical models. The roles of various parameters (lap length, type and amount of confining reinforcement, type of anchor bars, and concrete cover thickness) are investigated. One of the major findings indicates a significantly lower lap capacity when using plain-bar spirals compared to closed-ribbed stirrups. Additionally, at low stress levels, the models tend to be unconservative. Building on this insight, a modified model is proposed for lap splices provided with plain-bar spirals.