The Impact of Different Overlay Materials on the Tactile Detection of Virtual Straight Lines

Abstract

<p>To improve the perception of haptic feedback, materials and sense-modifier effects should be examined. Teflon, Nylon mesh, and Silicone overlays were tested in combination with lateral vibrations to study their impact on the tactile sense. A feelable point moving along a line was implemented through the use of a dynamically moving interference maximum generated via the offset actuation of four haptic exciters affixed to corners of a Gorilla Glass surface. This feedback was presented to eight participants in a series of randomized experiments. Both the Nylon mesh and Teflon covering revealed a statistically significant (p < 0.05) impact of improvement to the user performance in the task of dynamic haptic virtual straight lines localization. While Silicone covering, having three times greater friction than Gorilla Glass, has less or no impact on both decision time, the number of task repetitions, and error rate (p > 0.05). The lateral vibration modifier (60 Hz) can also successfully be used with an increase in performance by about twofold, at least that was demonstrated for both the Nylon mesh and Teflon covering.</p>