Weakening of tensile strength of granitic rock by HV-HF-AC actuation of piezoelectric properties of Quartz: a 3D numerical study

Abstract

High-voltage and high-frequency alternating current (HV-HF-AC) excitation of <br/>piezoelectric properties of Quartz is a potential method to induce cracks in granite. This was recently shown in a numerical feasibility study [6], where cracking was induced on cylindrical rock samples made of granite by sinusoidal AC excitation at the frequency of ~100 kHz and the amplitude of ~10 kV. However, this study did not investigate the weakening effect due to this cracking on the tensile strength of the sample. The present study addresses this topic <br/>numerically. For this end, a numerical method based on 3D embedded discontinuity finite elements for rock fracture and an explicit time stepping scheme to solve the coupled piezoelectro-mechanical problem is adopted. Rock heterogeneity and anisotropy are accounted for at the mineral mesotructure level. A preliminary numerical simulation demonstrates that the HV-HF-AC treatment reduces the tensile strength of a cylindrical granite sample by 12 %, <br/>making it thus a potential non-conventional pre-treatment method in comminution and excavation of Quartz bearing rocks and ores.