Hyppää sisältöön
    • Suomeksi
    • In English
Trepo
  • Suomeksi
  • In English
  • Kirjaudu
Näytä viite 
  •   Etusivu
  • Trepo
  • TUNICRIS-julkaisut
  • Näytä viite
  •   Etusivu
  • Trepo
  • TUNICRIS-julkaisut
  • Näytä viite
JavaScript is disabled for your browser. Some features of this site may not work without it.

Optimal Antenna Locations for Coverage Extension in Sub-Terahertz Vehicle-to-Vehicle Communications

Moltchanov, Dmitri; Beschastnyi, Vitalii; Ostrikova, Darya; Gaidamaka, Yuliya; Koucheryavy, Yevgeni; Samouylov, Konstantin (2023)

 
Avaa tiedosto
Optimal_Antenna_Locations_for_Coverage_Extension.pdf (1.075Mt)
Lataukset: 



Moltchanov, Dmitri
Beschastnyi, Vitalii
Ostrikova, Darya
Gaidamaka, Yuliya
Koucheryavy, Yevgeni
Samouylov, Konstantin
2023

IEEE Transactions on Wireless Communications
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
doi:10.1109/TWC.2023.3238881
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:tuni-202309288500

Kuvaus

Peer reviewed
Tiivistelmä
Sub-terahertz (sub-THz, 100-300 GHz) communications promise to bring extraordinary rates in future 6G systems. High path loss and blockage effects will limit the coverage of base stations (BS) to a few hundred meters making deployment of such systems along the roads expensive. As a way to decrease the BS density, relaying has been proposed. However, vehicle-to-vehicle (V2V) propagation is characterized by different sets of communications paths depending on the antenna locations raising the question of their optimal positions. In this paper, by utilizing IEEE 802.15.3d parameters and 300 GHz propagation measurements, we develop a mathematical framework for comparison of multi-hop relaying systems with different antenna locations. We utilize coverage, BS availability, and the data rate over a multi-hop path as metrics of interest. Our results show that the windshield location is characterized by lower data rates and larger coverage while bumper and engine levels are similar in terms of these metrics. For the windshield location, the coverage is extended by 50% with BS availability 0.95. The windshield location is recommended as it is less sensitive to the technology penetration rate and is characterized by larger coverage. The proposed approach shows gains of up to 32% in terms of required BS density for the range of vehicles density (10-40 units/km).
Kokoelmat
  • TUNICRIS-julkaisut [25020]
Kalevantie 5
PL 617
33014 Tampereen yliopisto
oa[@]tuni.fi | Tietosuoja | Saavutettavuusseloste
 

 

Selaa kokoelmaa

TekijätNimekkeetTiedekunta (2019 -)Tiedekunta (- 2018)Tutkinto-ohjelmat ja opintosuunnatAvainsanatJulkaisuajatKokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy
Kalevantie 5
PL 617
33014 Tampereen yliopisto
oa[@]tuni.fi | Tietosuoja | Saavutettavuusseloste