Koneenrakennusprosessin tehostaminen tuotesuunnittelulla
Mäkelä, Konsta (2023)
Mäkelä, Konsta
2023
Konetekniikan DI-ohjelma - Master's Programme in Mechanical Engineering
Tekniikan ja luonnontieteiden tiedekunta - Faculty of Engineering and Natural Sciences
This publication is copyrighted. Only for Your own personal use. Commercial use is prohibited.
Hyväksymispäivämäärä
2023-06-06
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:tuni-202306056505
https://urn.fi/URN:NBN:fi:tuni-202306056505
Tiivistelmä
Diplomityö tehdään kohdeyritykselle Contik Group Oy, joka valmistaa pääasiassa logistiikkaratkaisuja raskaisiin vaakasiirtoihin. Yrityksen liiketoiminta on projektiluontoista. Sen haasteena on monipuolisiin asiakastarpeisiin vastaamisen ja yrityksen prosessien tehostamisen yhteensovittaminen. Tämän diplomityön tavoitteena on löytää keinoja näiden kahden asian yhdistämiselle tuotesuunnittelun avulla.
Työssä pyritään noudattamaan konstruktiivisen tutkimuksen perusteita. Siitä syystä työ jakautuu kahteen osaan. Teoriaosassa perehdytään modulaariseen tuotesuunnitteluun eli modulointiin ja esitellään kymmenvaiheinen Brownfield-prosessi. BfP on jo olemassa oleville tuotteille sovellettava modulointiprosessi. Teoriaosan lisäksi työssä on soveltava käytännön osuus. Soveltavassa osassa pyritään käytännön kokeella todentamaan, että edellä mainittu teoria ja toimintamallit toimivat myös kohdeyrityksen liiketoimintaympäristön kontekstissa. Tässä työssä soveltavana osuutena toimii Brownfield-prosessin viiden ensimmäisen vaiheen seuraaminen. Näitä viittä vaihetta seuraamalla analysoidaan ja moduloidaan ennalta valittua Lauttavaunujen tuoteperhettä.
Työn lopputuloksena todetaan, että modulointi on tuotesuunnittelun keino, jota noudattamalla on mahdollista saavuttaa asetetut tavoitteet monipuolisesta asiakastarpeisiin vastaamisesta ja samanaikaisesti tehostaa yrityksen prosesseja. Soveltavan osuuden perusteella voidaan todeta, että kohdeyrityksen liiketoimintaympäristöstä johdettavat tavoitteet kohtaavat lukuisten modulaarisen tuotesuunnittelun arvontuottomekanismien kanssa. Kyseisiä arvontuottomekanismeja on mahdollista hyödyntää kohdeyrityksen toimesta myös käytännössä.
Diplomityössä ehdotetaan yritykselle jatkotoimenpiteenä Brownfield-prosessin loppuun saattamista työssä aloitetulle Lauttavaunujen tuoteperheen modulointihankkeelle. Kyseisen hankkeen jälkeen modulointiprojekteja suositellaan toteutettavaksi myös muille yrityksen tuoteperheille ja modulaarisen tuotesuunnittelun syvempää omaksumista osaksi yrityksen liiketoimintaa. The Master of Science thesis is done for the target company Contik Group Oy, which mainly manufactures logistics solutions for heavy horizontal transportation. The company’s business is project-based. Its challenge is to match the ability to respond to diverse customer needs while also improving the efficiency of the company’s processes. The goal of this thesis is to find ways to combine these two things through means of product design.
The thesis aims to follow the principles of constructive research. For that reason, the work is divided into two parts. The theory part focuses on modular product design or modularization and introduces the ten-step Brownfield Process. BfP is a modularization process applied to already existing products. In addition to the theoretical part, the thesis contains practical part. In the practical part the aim is to verify with a practical experiment that the theory and operating models also work in the context of the target company’s business environment. In this thesis the practical part follows the first five steps of the Brownfield Process. By following these five steps, the pre-selected product family of Rolltrailers (Lauttavaunu) is analyzed and made modular.
The results of the thesis state that the modularization is a means of product design that enables the ability to respond to versatile customer needs, while simultaneously being able to enhance the company’s processes. Based on the practical part, it can be stated that the goals set by the company’s business environment meet with numerous value generation mechanisms of modular product design and that it is possible to utilize those value generation mechanisms by the target company also in practice.
As a follow-up measure it is proposed that the modularization project for the product family of Rolltrailers that already got started in the thesis will be completed. After completing the project in question, it is recommended to start modularization projects for other product families of the company as well. Also, a deeper adoption of modular product design as part of company’s business model is proposed.
Työssä pyritään noudattamaan konstruktiivisen tutkimuksen perusteita. Siitä syystä työ jakautuu kahteen osaan. Teoriaosassa perehdytään modulaariseen tuotesuunnitteluun eli modulointiin ja esitellään kymmenvaiheinen Brownfield-prosessi. BfP on jo olemassa oleville tuotteille sovellettava modulointiprosessi. Teoriaosan lisäksi työssä on soveltava käytännön osuus. Soveltavassa osassa pyritään käytännön kokeella todentamaan, että edellä mainittu teoria ja toimintamallit toimivat myös kohdeyrityksen liiketoimintaympäristön kontekstissa. Tässä työssä soveltavana osuutena toimii Brownfield-prosessin viiden ensimmäisen vaiheen seuraaminen. Näitä viittä vaihetta seuraamalla analysoidaan ja moduloidaan ennalta valittua Lauttavaunujen tuoteperhettä.
Työn lopputuloksena todetaan, että modulointi on tuotesuunnittelun keino, jota noudattamalla on mahdollista saavuttaa asetetut tavoitteet monipuolisesta asiakastarpeisiin vastaamisesta ja samanaikaisesti tehostaa yrityksen prosesseja. Soveltavan osuuden perusteella voidaan todeta, että kohdeyrityksen liiketoimintaympäristöstä johdettavat tavoitteet kohtaavat lukuisten modulaarisen tuotesuunnittelun arvontuottomekanismien kanssa. Kyseisiä arvontuottomekanismeja on mahdollista hyödyntää kohdeyrityksen toimesta myös käytännössä.
Diplomityössä ehdotetaan yritykselle jatkotoimenpiteenä Brownfield-prosessin loppuun saattamista työssä aloitetulle Lauttavaunujen tuoteperheen modulointihankkeelle. Kyseisen hankkeen jälkeen modulointiprojekteja suositellaan toteutettavaksi myös muille yrityksen tuoteperheille ja modulaarisen tuotesuunnittelun syvempää omaksumista osaksi yrityksen liiketoimintaa.
The thesis aims to follow the principles of constructive research. For that reason, the work is divided into two parts. The theory part focuses on modular product design or modularization and introduces the ten-step Brownfield Process. BfP is a modularization process applied to already existing products. In addition to the theoretical part, the thesis contains practical part. In the practical part the aim is to verify with a practical experiment that the theory and operating models also work in the context of the target company’s business environment. In this thesis the practical part follows the first five steps of the Brownfield Process. By following these five steps, the pre-selected product family of Rolltrailers (Lauttavaunu) is analyzed and made modular.
The results of the thesis state that the modularization is a means of product design that enables the ability to respond to versatile customer needs, while simultaneously being able to enhance the company’s processes. Based on the practical part, it can be stated that the goals set by the company’s business environment meet with numerous value generation mechanisms of modular product design and that it is possible to utilize those value generation mechanisms by the target company also in practice.
As a follow-up measure it is proposed that the modularization project for the product family of Rolltrailers that already got started in the thesis will be completed. After completing the project in question, it is recommended to start modularization projects for other product families of the company as well. Also, a deeper adoption of modular product design as part of company’s business model is proposed.