Manuaalisen kuormalavavaraston kehittäminen
Rantanen, Ville (2022)
Rantanen, Ville
2022
Tuotantotalouden DI-ohjelma - Master's Programme in Industrial Engineering and Management
Johtamisen ja talouden tiedekunta - Faculty of Management and Business
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Hyväksymispäivämäärä
2022-08-13
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:tuni-202208026141
https://urn.fi/URN:NBN:fi:tuni-202208026141
Tiivistelmä
Tässä tutkimuksessa tarkasteltiin pehmo- ja tiivispaperia valmistavan tuotantolaitoksen varaston toimintaa. Työn tavoitteena oli selvittää varastoinnin merkittävimmät haasteet sekä tuottaa näihin haasteisiin kehitysehdotuksia. Tutkimuksessa hyödynnettiin niin määrällistä kuin laadullista dataa. Teorian ja kerätyn datan avulla muodostettiin kehitysehdotuksia tehostamaan kohdeyrityksen varastointia tulevaisuudessa. Laadullista dataa käytettiin varaston ongelmakohtien selvittämiseen, kun taas määrällistä dataa käytettiin muun muassa varaston eri osien etäisyyksien, kapasiteetin ja lavamäärien tarkasteluun. Varaston lavamäärien vaihtelua tutkittiin vuosilta 2020 ja 2021.
Suurimpina haasteina varastoinnissa havaittiin tuotteiden suuri määrä, tilan puute sekä tilojen sokkeloisuus. Tilanpuutteeseen on monia syitä, mutta tässä tutkimuksessa tarkasteltiin varaston näkökulmaa. Muita tunnistettuja varastoinnin haasteita olivat muun muassa turha työ sekä varastonimikkeiden sijoittelu varastotiloissa. Tilanpuute rajoittaa osin myös näiden osa-alueiden kehittämistä, joten merkittävimmät kehitysehdotukset koskivat tilankäytön tehostamista. Toisaalta kehitysehdotuksissa nostettiin esiin myös varastoautomatiikan mahdollinen käyttöönotto sekä sen vaikutus varastoinnin kokonaisuuteen.
Tutkimus vahvistaa ennakko-olettamusta varaston liian korkean täyttöasteen ja heikon tehokkuuden yhteydestä. Korkea täyttöaste aiheuttaa turhaa työtä ja heikentää varaston järjestystä. Kohdeyrityksen tapauksessa tämä ilmenee lisäksi sillä, että eri varastonimikkeillä ei ole pysyviä vakituisia paikkoja varastossa.
Lyhyen aikavälin kehitysehdotuksissa korostui etenkin varaston kapasiteetin kasvattaminen läpivirtaushyllyköillä sekä pienempien eräkokojen kautta saavutettavat hyödyt varastoinnissa. Pidemmän aikavälin kehitysehdotuksissa taas korostui valinta manuaalisen ja automaattisen varastoinnin välillä. Automaattisella varastoinnilla olisi mahdollista ratkaista useita varastoinnin nykyisistä haasteista. Jos yritys jatkaa manuaalista varastointia, turhaa työtä voitaisiin vähentää ottamalla käyttöön tietokoneen optimoimat keräilyreitit. Kohdeyrityksen tapauksessa varaston tilankäytön ja tehokkuuden näkökulmasta automaattivarasto olisi paras vaihtoehto, joskin varsin suuri investointi. This thesis was done for a tissue and greaseproof paper manufacturer, and it considers warehousing. The aim of this thesis was to clarify the most significant challenges in the warehouse and to produce development proposals for these challenges. In the research, quantitative and qualitative data were used. Qualitative data was used to help to find challenges in the warehouse and quantitative data was used to for example determine distances, capacity, and the number of pallets. The variation in the number of pallets in the warehouse was studied for the years 2020 and 2021.
The most significant challenges were the large number of products, lack of space, and the complexity of the facilities. There are many reasons for the lack of space but in this study, only the warehouse perspective was studied. Other challenges were unnecessary work and the placement of inventory items for example. The lack of space limits the improvement of these parts of warehousing. Because of that, the most significant development proposals focus on more effective use of space. On the other hand, warehouse automation and its impacts on warehousing were also considered as a part of development proposals.
The research confirms the presumption of the connection between the high filling rate of the warehouse and weak efficiency. The high filling rate causes unnecessary work and undermines the order of the warehouse. In this case, there are no permanent positions in stock-keeping units because of a lack of space.
In the short-term development proposals, the increase in warehouse capacity with flow-through shelves and the benefits in storage achieved through smaller lot sizes were especially emphasized. In the long-term development proposals, the choice between manual and automatic storage was emphasized. With automated warehousing, it is possible to solve many current challenges. If manual storage is chosen unnecessary work can be reduced with computer-aided picking. In this case, an automated warehouse would be the best option considering space usage and efficiency. On the other hand, the required investment would be big.
Suurimpina haasteina varastoinnissa havaittiin tuotteiden suuri määrä, tilan puute sekä tilojen sokkeloisuus. Tilanpuutteeseen on monia syitä, mutta tässä tutkimuksessa tarkasteltiin varaston näkökulmaa. Muita tunnistettuja varastoinnin haasteita olivat muun muassa turha työ sekä varastonimikkeiden sijoittelu varastotiloissa. Tilanpuute rajoittaa osin myös näiden osa-alueiden kehittämistä, joten merkittävimmät kehitysehdotukset koskivat tilankäytön tehostamista. Toisaalta kehitysehdotuksissa nostettiin esiin myös varastoautomatiikan mahdollinen käyttöönotto sekä sen vaikutus varastoinnin kokonaisuuteen.
Tutkimus vahvistaa ennakko-olettamusta varaston liian korkean täyttöasteen ja heikon tehokkuuden yhteydestä. Korkea täyttöaste aiheuttaa turhaa työtä ja heikentää varaston järjestystä. Kohdeyrityksen tapauksessa tämä ilmenee lisäksi sillä, että eri varastonimikkeillä ei ole pysyviä vakituisia paikkoja varastossa.
Lyhyen aikavälin kehitysehdotuksissa korostui etenkin varaston kapasiteetin kasvattaminen läpivirtaushyllyköillä sekä pienempien eräkokojen kautta saavutettavat hyödyt varastoinnissa. Pidemmän aikavälin kehitysehdotuksissa taas korostui valinta manuaalisen ja automaattisen varastoinnin välillä. Automaattisella varastoinnilla olisi mahdollista ratkaista useita varastoinnin nykyisistä haasteista. Jos yritys jatkaa manuaalista varastointia, turhaa työtä voitaisiin vähentää ottamalla käyttöön tietokoneen optimoimat keräilyreitit. Kohdeyrityksen tapauksessa varaston tilankäytön ja tehokkuuden näkökulmasta automaattivarasto olisi paras vaihtoehto, joskin varsin suuri investointi.
The most significant challenges were the large number of products, lack of space, and the complexity of the facilities. There are many reasons for the lack of space but in this study, only the warehouse perspective was studied. Other challenges were unnecessary work and the placement of inventory items for example. The lack of space limits the improvement of these parts of warehousing. Because of that, the most significant development proposals focus on more effective use of space. On the other hand, warehouse automation and its impacts on warehousing were also considered as a part of development proposals.
The research confirms the presumption of the connection between the high filling rate of the warehouse and weak efficiency. The high filling rate causes unnecessary work and undermines the order of the warehouse. In this case, there are no permanent positions in stock-keeping units because of a lack of space.
In the short-term development proposals, the increase in warehouse capacity with flow-through shelves and the benefits in storage achieved through smaller lot sizes were especially emphasized. In the long-term development proposals, the choice between manual and automatic storage was emphasized. With automated warehousing, it is possible to solve many current challenges. If manual storage is chosen unnecessary work can be reduced with computer-aided picking. In this case, an automated warehouse would be the best option considering space usage and efficiency. On the other hand, the required investment would be big.