Työlaitteen ja kuormaajan yhteensopivuuden hallinta tuotteistamisessa
Viljamaa, Juho (2020)
Viljamaa, Juho
2020
Konetekniikan DI-ohjelma - Master's Programme in Mechanical Engineering
Tekniikan ja luonnontieteiden tiedekunta - Faculty of Engineering and Natural Sciences
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Hyväksymispäivämäärä
2020-12-28
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:tuni-202012188978
https://urn.fi/URN:NBN:fi:tuni-202012188978
Tiivistelmä
Tämä diplomityö tehtiin suomalaiselle pienkuormaajavalmistajalle, joka halusi pysyä nimettömänä. Yrityksellä on valikoimissaan useita eri kuormaajamalleja sekä suuri määrä niihin kytkettäviä työlaitteita. Laitevalikoimat kasvavat jatkuvasti kovaa vauhtia ja se on aiheuttanut ongelmia laitteiden yhteensopivuuksien hallinnassa. Toistaiseksi yhteensopivuuksien hallinnassa ei ole ollut mitään systemaattisia menetelmiä.
Tässä työssä keskityttiin kehittämään työlaitesuunnittelua. Työn tavoitteena oli kehittää toimintatapoja työlaitteiden tuotteistamisprosessissa pääpainon ollessa yhteensopivuuksien hallinta. Tutkimusongelmana oli miten työlaitteen ja kuormaajan yhteensopivuuden hallintaa saadaan parannettua tuotteistamisprosessissa. Ongelmaan haettiin ratkaisua selvittämällä, millaisia yhteensopivuuden hallintakeinoja on olemassa ja mistä yhteensopivuus koostuu kohdeyrityksessä.
Tutkimus aloitettiin kirjallisuuskatsauksella työn aihepiireistä. Tutkitut aihepiirit olivat virtausmalli, rajapintojen hallintatavat sekä CE-merkityn työlaitteen tuotteistaminen. Kirjallisuuskatsauksen jälkeen aloitettiin tapaustutkimus kohdeyrityksen tilanteesta. Tapaustutkimuksen aluksi mallinnettiin työlaitteiden tuotteistamisprosessin nykytila virtausmallilla. Luotua nykytilavirtausmallia käytettiin tuotteistamisprosessin kehittämiseen. Tämän jälkeen sovellettiin kirjallisuudesta löytyneitä rajapintojen hallintatapoja kohdeyrityksen tilanteeseen.
Tutkimuksen tulokseksi saatiin lista kehitysehdotuksia työlaitteen tuotteistamisprosessiin. Työlaitteiden ja kuormaajien välinen rajapinta dokumentoitiin tarkasti. Lisäksi luotiin useita aputyökaluja työlaitteiden suunnitteluprosessiin parantamaan yhteensopivuuksien hallintaa. This master’s thesis has been done to a Finnish compact loader manufacturer which wanted to stay anonymous. The company has multiple different loader series and a large amount of attachments in their selections. The selections are constantly growing fast and that has costed problems in managing compatibilities between loaders and attachments. For now, there hasn’t been used any systematic methods in managing compatibilities.
The focus of this thesis was to develop attachment designing. The goal of this thesis was to develop the working methods in productization process of attachment while the main emphasis was in managing compatibilities. The research problem was how to improve the managing of compatibilities between attachment and loader in productization process. The solution for the research problem was searched by figuring out the ways of the managing compatibilities and from what compatibility consist of in this certain company.
The study was started by literature check of the main subjects. The researched subjects were flow model, managing ways of interfaces and productization of CE marked attachment. The case study on the target company was started after the literature check. The present state of the productization process of the attachments was modelled with flow model in the beginning of the case study. The present state of flow model was used to improve the productization process. After that, the managing ways of interfaces found from the literature were applied to the target company’s processes.
For the result of this study, a list of suggestions for improving of the productization process of the attachments were given. The interface between attachments and loaders were documented carefully. Furthermore, multiple auxiliary tools were made for attachment designing to improve the managing of compatibilities.
Tässä työssä keskityttiin kehittämään työlaitesuunnittelua. Työn tavoitteena oli kehittää toimintatapoja työlaitteiden tuotteistamisprosessissa pääpainon ollessa yhteensopivuuksien hallinta. Tutkimusongelmana oli miten työlaitteen ja kuormaajan yhteensopivuuden hallintaa saadaan parannettua tuotteistamisprosessissa. Ongelmaan haettiin ratkaisua selvittämällä, millaisia yhteensopivuuden hallintakeinoja on olemassa ja mistä yhteensopivuus koostuu kohdeyrityksessä.
Tutkimus aloitettiin kirjallisuuskatsauksella työn aihepiireistä. Tutkitut aihepiirit olivat virtausmalli, rajapintojen hallintatavat sekä CE-merkityn työlaitteen tuotteistaminen. Kirjallisuuskatsauksen jälkeen aloitettiin tapaustutkimus kohdeyrityksen tilanteesta. Tapaustutkimuksen aluksi mallinnettiin työlaitteiden tuotteistamisprosessin nykytila virtausmallilla. Luotua nykytilavirtausmallia käytettiin tuotteistamisprosessin kehittämiseen. Tämän jälkeen sovellettiin kirjallisuudesta löytyneitä rajapintojen hallintatapoja kohdeyrityksen tilanteeseen.
Tutkimuksen tulokseksi saatiin lista kehitysehdotuksia työlaitteen tuotteistamisprosessiin. Työlaitteiden ja kuormaajien välinen rajapinta dokumentoitiin tarkasti. Lisäksi luotiin useita aputyökaluja työlaitteiden suunnitteluprosessiin parantamaan yhteensopivuuksien hallintaa.
The focus of this thesis was to develop attachment designing. The goal of this thesis was to develop the working methods in productization process of attachment while the main emphasis was in managing compatibilities. The research problem was how to improve the managing of compatibilities between attachment and loader in productization process. The solution for the research problem was searched by figuring out the ways of the managing compatibilities and from what compatibility consist of in this certain company.
The study was started by literature check of the main subjects. The researched subjects were flow model, managing ways of interfaces and productization of CE marked attachment. The case study on the target company was started after the literature check. The present state of the productization process of the attachments was modelled with flow model in the beginning of the case study. The present state of flow model was used to improve the productization process. After that, the managing ways of interfaces found from the literature were applied to the target company’s processes.
For the result of this study, a list of suggestions for improving of the productization process of the attachments were given. The interface between attachments and loaders were documented carefully. Furthermore, multiple auxiliary tools were made for attachment designing to improve the managing of compatibilities.