"216" - Selaus asiasanan mukaan TUNICRIS-julkaisut
Viitteet 1-20 / 1262
-
0.6V threshold voltage thin film transistors with solution processable indium oxide (In<sub>2</sub>O<sub>3</sub>) Channel and Anodized High-κ Al<sub>2</sub>O<sub>3</sub> Dielectric
(01.07.2019)
article<p>Low-voltage operation and low processing temperature of metal oxide transistors remain a challenge. Commonly metal oxide transistors are fabricated at very high processing temperatures (above 500°C) and their ... -
1.4 µm continuous-wave diamond Raman laser
(11.12.2017)
articleThe longest wavelength (~1.4 µm) emitted by a diamond Raman laser pumped by a semiconductor disk laser (SDL) is reported. The output power of the intracavity-pumped Raman laser reached a maximum of 2.3 W with an optical ... -
1D Light-Emitting MAPbBr<sub>3</sub> Perovskite Encapsulated in Carbon Nanotubes
(18.09.2025)
articleThe instability and broad optical features of perovskites limit the full realization of their unique optoelectronic potential. In this study, a novel MAPbBr3@SWCNTs hybrid material is presented, in which methylammonium ... -
31% European InGaP/GaAs/InGaNAs Solar Cells For Space Application
E3S Web of Conferences (2017)
conferenceWe report a triple junction InGaP/GaAs/InGaNAs solar cell with efficiency of ~31% at AM0, 25 °C fabricated using a combined molecular beam epitaxy (MBE) and metal-organic chemical vapour deposition (MOCVD) processes. The ... -
3D interfacial debonding during microbond testing: Advantages of local strain recording
(10.04.2020)
articleThe microbond (MB) test is the most widely adopted micromechanical test to characterize fibre matrix interfaces but typically lacks reliability and output for determining multi-parameter interface models. In the current ... -
3D modelling of long-term sulfide corrosion of copper canisters in a spent nuclear fuel repository
(30.08.2022)
articleCopper canisters are a central component in the safety of the Finnish spent fuel repository concept (KBS-3), where the main corrodent potentially affecting the canister integrity is sulfide. In this study, a 3D numerical ... -
3D mosquito screens to create window double screen traps for mosquito control
(29.08.2017)
articleBackground<br/><br/>Mosquitoes are vectors for many diseases such as malaria. Insecticide-treated bed nets and indoor residual spraying of insecticides are the principal malaria vector control tools used to ... -
3D Printed and Photonically Cured Graphene UHF RFID Tags on Textile, Wood, and Cardboard Substrates
(20.06.2017)
articleThis paper introduces 3D direct writing and microdispensing of graphene ultrahigh frequency (UHF) radio-frequency-identification (RFID) antennas on textile, wood, and cardboard substrates, subsequently cured either by ... -
3D printed glass-based biophotonic scaffolds for in situ activation of photoswitchable drugs
(27.02.2025)
articleThe fabrication of porous biophotonic scaffold using a robocasting is reported here. Such material could be used for in-situ activation of photoswitchable drugs, which is essential for improving therapeutic efficacy while ... -
3D printing of ceramic substrates: a cross-platform comparison between direct ink writing (DIW) and digital light processing (DLP) technologies
(2026)
articleThis study presents a comparative analysis of ceramic honeycomb substrates fabricated using two additive manufacturing (AM) techniques: Direct Ink Writing (DIW) and Digital Light Processing (DLP). By varying key printing ... -
730 nm Light-Induced Cleavage of BODIPY Photocages via Entropy-Driven Triplet Sensitization
(2024)
articleLight-activated drug delivery systems allow precise spatiotemporal control of a drug release process. However, safe and efficient drug release activation needs a low-power nonpulsed red/near-infrared light with high tissue ... -
A52M/SA52 Dissimilar Metal RPV Repair Weld: Experimental Evaluation and Post-Weld Characterizations
PVP - American Society of Mechanical Engineers. Pressure Vessels and Piping Division (2020)
conferenceAging management of the existing fleet of nuclear power plants is becoming an increasingly important topic, especially as many units are approaching their design lifetimes or are entering long-term operation. As these ... -
Accelerated Carbonation of High-Calcite Wollastonite Tailings
(04 / 2024)
articleWollastonite (CaSiO3) is the most researched and well-defined mineral in the field of CO2 mineralization, but it is also a sought-after process mineral and thus, not easily justified for large scale ex situ carbon ... -
Accelerated deactivation studies of the natural-gas oxidation catalyst-Verifying the role of sulfur and elevated temperature in catalyst aging
(01.10.2015)
article<p>Accelerated deactivation, caused by thermal aging (TA) and/or sulfur+water poisoning (SW), of the PtPd/γ-Al<sub>2</sub>O<sub>3</sub> natural-gas oxidation catalyst was studied. Thermal aging ... -
Accelerated Engineering of ELP-Based Materials through Hybrid Biomimetic-De Novo Predictive Molecular Design
(11.07.2024)
articleEfforts to engineer high-performance protein-based materials inspired by nature have mostly focused on altering naturally occurring sequences to confer the desired functionalities, whereas de novo design lags significantly ... -
Achieving a slippery, liquid-infused porous surface with anti-icing properties by direct deposition of flame synthesized aerosol nanoparticles on a thermally fragile substrate
(04 / 2017)
articleSlippery, liquid-infused porous surfaces offer a promising route for producing omniphobic and anti-icing surfaces. Typically, these surfaces are made as a coating with expensive and time consuming assembly methods or with ... -
Achieving a Superhydrophobic, Moisture, Oil and Gas Barrier Film Using a Regenerated Cellulose-Calcium Carbonate Composite Derived from Paper Components or Waste
(08 / 2022)
articleIt has been a persistent challenge to develop eco-friendly packaging cellulose film providing the required multiple barrier properties whilst simultaneously contributing to a circular economy. Typically, a cellulosic film ... -
Acoustic emissions caused by fretting induced adhesion, wear and cracking
(31.12.2024)
article -
Activation parameters from nanoindentation repeated creep experiments: Spherical indenter vs cylindrical flat punch
(05 / 2026)
articleThis study explores a repeated creep indentation approach to investigate the underlying deformation mechanisms in metals by extracting key deformation activation parameters. Using a thermally stable in-situ nanoindenter, ...
