Lignin dispersion in polybutadiene rubber (BR) with different mixing parameters
Koskinen, Jukka; Kemppainen, Noora; Sarlin, Essi (2024)
Koskinen, Jukka
Kemppainen, Noora
Sarlin, Essi
2024
Progress in Rubber, Plastics and Recycling Technology
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:tuni-202411049817
https://urn.fi/URN:NBN:fi:tuni-202411049817
Kuvaus
Peer reviewed
Tiivistelmä
There is a strong need to replace carbon black and silica as a reinforcing filler in rubber industry. Lignin is a promising option as a replacement, because of its wide availability, complex chemistry and sustainable source. Typically, the reinforcing effect of lignin is weak and one major cause is the poor dispersion of filler. In this study, typical dispersion parameters in mixing are tested in a systematic way to validate their effect on kraft lignin dispersion in polybutadiene rubber. Tested mixing variables are temperature, rotor speed, mixing time, fill ratio and shear forces. The effect of variables to dispersion are analyzed from electron microscopy images with an image analysis software. With this novel method exact number of particles and their properties could be calculated. Unlike for conventional fillers (carbon black and silica), the results show clearly that only the mixing temperature has an effect on lignin dispersion in rubber. With high mixing temperatures, dispersion and hence mechanical properties improved. The better dispersion is especially seen as decreasing number of large (>Ø 5 μm) particles. Other mixing variables did not have significant effect on dispersion and the number of large particles.
Kokoelmat
- TUNICRIS-julkaisut [19236]