Towards Sustainable Composite Manufacturing with Recycled Carbon Fiber Reinforced Thermoplastic Composites
Palola, Sarianna; Laurikainen, Pekka; García-Arrieta, Sonia; Astorkia, Egoitz Goikuria; Sarlin, Essi (2022-03-09)
Palola, Sarianna
Laurikainen, Pekka
García-Arrieta, Sonia
Astorkia, Egoitz Goikuria
Sarlin, Essi
09.03.2022
1098
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:tuni-202204113161
https://urn.fi/URN:NBN:fi:tuni-202204113161
Kuvaus
Peer reviewed
Tiivistelmä
Currently, the vast majority of composite waste is either landfilled or incinerated, causing a massive burden on the environment and resulting in the loss of potentially valuable raw material. Here, conventional pyrolysis and reactive pyrolysis were used to reclaim carbon fibers from aero-nautical scrap material, and to evaluate the feasibility of using reclaimed carbon fibers in structural components for the automotive sector. The need for fiber sizing was investigated as well as the behavior of the fiber material in macroscopic impact testing. The fibers were characterized with the single fiber tensile test, scanning electron microscopy, and the microbond test. Critical fiber length was estimated in both polypropylene and polyamide matrices. Tensile strength of the fiber material was better preserved with the reactive pyrolysis compared to the conventional pyrolysis, but in both cases the interfacial shear strength was retained or even improved. The impact testing revealed that the components made of these fibers fulfilled all required deformation limits set for the components with virgin fibers. These results indicate that recycled carbon fibers can be a viable option even in structural components, resulting in lower production costs and greener composites.
Kokoelmat
- TUNICRIS-julkaisut [19011]