Biodegradable passive resonance sensor : Fabrication and initial testing
Salpavaara, Timo; Ellä, Ville; Kellomäki, Minna; Lekkala, Jukka (2015)
Salpavaara, Timo
Ellä, Ville
Kellomäki, Minna
Lekkala, Jukka
SCITEPRESS
2015
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:tuni-202005225582
https://urn.fi/URN:NBN:fi:tuni-202005225582
Kuvaus
Peer reviewed
Tiivistelmä
Biodegradable resonance circuits were studied. The circuits have a novel two-layer resonator structure without galvanic through hole vias. A patterned magnesium layers were evaporated on biodegradable PLA sheets by using a 3D printed mask. The circuits were assembled by heat sealing two magnesium patterned sheets together to encapsulate the circuit structure. An inductive link is used to wirelessly detect the resonance frequency of the circuit. The circuits were tested when immersed in de-ionised water and saline. According to the tests, the designed resonator structure can be measured in aqueous environment. The resonance of the tested circuit was observable at least for 51 hours. The concept still needs more development to extend degradation time and to increase the stability during immersion.
Kokoelmat
- TUNICRIS-julkaisut [16977]