TUNICRIS-julkaisut - Trepo

Viitteet 1-3 / 3

Fretting degradation in large flat-on-flat contact under oil lubrication: Effect of displacement amplitude

Zabihi, A.; Juoksukangas, J.; Hintikka, J.; Salminen, T.; Mäntylä, A.; Vaara, J.; Frondelius, T.; Vippola, M. (09 / 2025)
article

Fretting degradation of self-mated quenched and tempered steel was studied by varying loading conditions via imposed tangential displacement amplitude in oil-lubricated flat-on-flat contact. Detailed microscopic characterization ...
Influence of displacement amplitude on fretting-induced friction and wear of steel in oil-lubricated contact

Zabihi, A.; Juoksukangas, J.; Hintikka, J.; Salminen, T.; Mäntylä, A.; Vaara, J.; Frondelius, T.; Vippola, M. (05 / 2024)
article

Many fretting-prone contacts are surrounded by oils, although they are not intended to lubricate them. To study the fretting behavior of contacts whose edge is exposed to engine oil, self-mated 34CrNiMo6 +QT steel was ...
An insight into the effect of rough surfaces and contact orientation on the fretting characteristics of quenched and tempered steel

Zabihi, A.; Juoksukangas, J.; Hintikka, J.; Honkanen, M.; Mäntylä, A.; Vaara, J.; Frondelius, T.; Vippola, M. (11 / 2023)
article

<p>The effect of a rough, textured surface and contact orientations on the fretting behavior of self-mated martensitic 34CrNiMo6 +QT steel was examined via a large annular flat-on-flat contact. A friction study ...