Haku
Viitteet 51-60 / 60
Characterization of the Dynamic Behavior and Microstructure Evolution of High Strength Sheet Steels
(Tampere University of Technology, 2009)
Artikkeliväitöskirja
Artikkeliväitöskirja
The use of modern high strength steels enables automotive producers to notably reduce the vehicle body mass and this way meet today’s fuel efficiency and green house gas emission requirements without compromising structural ...
Microstructural characteristics and corrosion properties of cold-sprayed coatings
(Tampere University of Technology, 2010)
Artikkeliväitöskirja
Artikkeliväitöskirja
Cold spraying is a thermal spray process which enables production of metallic and metallic-ceramic coatings with dense (very low porosity level) and pure (low oxygen content) structures. Several coating properties such as ...
Inverse load sensing method for line load determination of beam-like structures
(Tampere University of Technology, 2008)
Monografiaväitöskirja
Monografiaväitöskirja
In this thesis, an inverse load sensing method is developed and investigated. Accordingly, it is found that strain measurements of a beam-like structure can be utilized in order to solve the actuating line load distribution. ...
Experimental and numerical analysis of the hydraulic circuit of a high pressure common rail diesel fuel injection system
(Tampere University of Technology, 2007)
Monografiaväitöskirja
Monografiaväitöskirja
This thesis deals with the analysis of fluid transients in the hydraulic circuit of a high pressure common rail diesel fuel injection system for light vehicle applications. The injection process triggers flow and pressure ...
Hot-wire laser cladding: Process, materials and their properties
(Tampere University of Technology, 2008)
Artikkeliväitöskirja
Artikkeliväitöskirja
Reactively Synthesized Functionally Gradient Metal Matrix Composite Micro-structural Characteristics, Mechanical Properties and Thermal Stability
(Tampere University of Technology, 2011)
Monografiaväitöskirja
Monografiaväitöskirja
Wetting and Reactivity between Nitride Ceramics and Molten Copper and Silver Alloys
(Tampere University of Technology, 2012)
Monografiaväitöskirja
Monografiaväitöskirja
Wetting and reactivity were studied for molten Cu-Cr, Cu-Zr and Ag-Zr alloys on two nitride ceramics AlN and Si₃N₄. The aim of the study was to understand the interfacial behaviour of these metal alloys in molten state on ...
Logical and semantic foundations of knowledge representation for assembly and manufacturing processes
(Tampere University of Technology, 2010)
Monografiaväitöskirja
Monografiaväitöskirja
Partly due to the increase in global competition, the nature of manufacturing paradigms in Europe has been undergoing continuous change in recent decades. Pressures from the market are forcing companies to evolve into new ...
Injection Moulded Thermoplastic Elastomer - Metal Hybrids
(Tampere University of Technology, 2012)
Artikkeliväitöskirja
Artikkeliväitöskirja
Thermoplastic – metal hybrids are a recent addition to material space. They are macroscopic composites of thermoplastic and metal with a defined structure formed during manufacturing and possess properties from both material ...
Characterisation of wearable and implantable physiological measurement devices
(Tampere University of Technology, 2010)
Artikkeliväitöskirja
Artikkeliväitöskirja
Electrodes are an important part of any biopotential measurement application. The electrodes will be in direct galvanic contact with the skin or tissue of the measurement subject. The interface between the electrode and ...