Haku
Viitteet 1-10 / 10
Capability-based adaptation of production systems in a changing environment
(Tampere University of Technology, 2012)
Monografiaväitöskirja
Monografiaväitöskirja
Today’s production systems have to cope with volatile production environments characterized by frequently changing customer requirements, an increasing number of product variants, small batch sizes, short product life-cycles, ...
Customisation of Fashion Products Using Complete Garment Technology
(Tampere University of Technology, 2012)
Artikkeliväitöskirja
Artikkeliväitöskirja
Complete garment knitting technology is a method of producing knitted products, generally fashion garments, ready-made directly in the knitting machine without additional operations such as cutting and sewing. This makes ...
Modelling and Robust Control of Hydraulic Manipulators
(Tampere University of Technology, 2012)
Monografiaväitöskirja
Monografiaväitöskirja
Barkhausen Noise Method for Hardened Steel Surface Characterization - The Effect of Heat Treatments, Thermal Damages and Stresses
(Tampere University of Technology, 2012)
Artikkeliväitöskirja
Artikkeliväitöskirja
This work concentrates on the non-destructive magnetic Barkhausen noise (BN) method. The BN method can be utilized in the detection of altered material properties such as changes in microstructure and stress. Method can ...
Strain Rate History Effects in a Metastable Austenitic Stainless Steel
(Tampere University of Technology, 2012)
Monografiaväitöskirja
Monografiaväitöskirja
The mechanical behavior of metastable austenitic steels can be relatively complex in terms of temperature and strain rate sensitivity. This is connected to their low stacking fault energy and tendency towards martensitic ...
Development of Remote Handling Pipe Jointing Tools for ITER
(Tampere University of Technology, 2012)
Monografiaväitöskirja
Monografiaväitöskirja
Welding is broadly defined as a permanent method of material joining. In the field of Remote Handling (RH) however the combined requirements for high quality joints and regular replacement of high value components and plant ...
Analysis of Slipper Structures in Water Hydraulic Axial Piston Pumps
(Tampere University of Technology, 2012)
Monografiaväitöskirja
Monografiaväitöskirja
This thesis is focused on slipper behaviour during operation, slipper behaviour during swashplate turning and especially the impact of the slipper deformations in water hydraulic axial piston pumps. Experimental research, ...
Intelligent Interpretation of Machine Condition Data
(Tampere University of Technology, 2012)
Monografiaväitöskirja
Monografiaväitöskirja
This dissertation argues that classification is an effective tool in the prediction of machine condition. A system based on continuous learning can be developed to automate the laborious process of interpretation of symptoms ...
Wetting and Reactivity between Nitride Ceramics and Molten Copper and Silver Alloys
(Tampere University of Technology, 2012)
Monografiaväitöskirja
Monografiaväitöskirja
Wetting and reactivity were studied for molten Cu-Cr, Cu-Zr and Ag-Zr alloys on two nitride ceramics AlN and Si₃N₄. The aim of the study was to understand the interfacial behaviour of these metal alloys in molten state on ...
Injection Moulded Thermoplastic Elastomer - Metal Hybrids
(Tampere University of Technology, 2012)
Artikkeliväitöskirja
Artikkeliväitöskirja
Thermoplastic – metal hybrids are a recent addition to material space. They are macroscopic composites of thermoplastic and metal with a defined structure formed during manufacturing and possess properties from both material ...