Haku
Viitteet 1-10 / 11
Torque moment – tension force relation for anchor bolts
(2018)
Diplomityö
Diplomityö
The main purpose of this thesis was to study the relationship between torque and tension for HPM and PPM anchor bolts. This was done by determining the torque coefficients and torque – tension curves. The impact of lubrication ...
Tensile capacity of the grooved steel pipe pile
(2018)
Diplomityö
Diplomityö
Anchors are often used to resist tensile forces on tall and narrow structures where steel pipe piles are used to restrain compressive force. It has been studied that by grooving the steel pipe pile and by drilling and ...
Algorithm-Aided Structural Engineering of Steel-Framed Warehouse
(2018)
Diplomityö
Diplomityö
The thesis inspects algorithm-aided structural design which may be the next big development step in structural engineering. The main aims of the thesis are to examine the possibilities of algorithm-aided structural engineering ...
Automation of construction planning of a reinforced concrete retaining wall
(2018)
Diplomityö
Diplomityö
The work of designing structures can is completely computerised. Much manual work involving multiple pieces of software is still required. This thesis explores methods for automation of the planning process.
The construction ...
Market entry potential for foreign competitors vis-à-vis Finnish wood construction markets with an emphasis on structural connections
(2018)
Diplomityö
Diplomityö
This Master’s thesis has been commissioned by Rotho Blaas S.r.l. of Italy. The main aim of the study is to design a strategy for the segmentation of and entry into the Finnish wood construction markets from the point of ...
Development and Optimization of Curtain Wall Connection System
(2018)
Diplomityö
Diplomityö
A total of 8 different connections (4 custom profiles and 4 L-profiles) for curtain wall systems are developed while investigating the benefits of applying modern numerical analysis, optimization and parametric design ...
Water content determination of soft Finnish clays using electrical conductivity measurements
(2018)
Diplomityö
Diplomityö
This thesis is made in accordance to evaluate a possibility to use electrical conductivity measurements for determination of geotechnical parameters. The main goal of this thesis is to find a way to determine water content ...
Implementing Takt Planning in Structural Design
(2018)
Diplomityö
Diplomityö
This Master’s Thesis covers how takt planning has been used in manufacturing and construction production, and how it could be applied to structural design. The objective of the study is to develop a proposal for a concept ...
Implementation of Lean Construction Tools and Their Contribution to Site Management Process
(2018)
Diplomityö
Diplomityö
The objectives of this thesis were to study for Fira Oy, what takt planning process is like in an interior work stage of an apartment building, and what kind of problems appear in its implementation. Because takt production ...
Rural Water Supply Technology Selection in Achieving Sustainable Development Goal 6 in Amhara, Ethiopia
(2018)
Diplomityö
Diplomityö
This Master’s thesis was done for a rural water supply development project, COWASH. To date, it has mainly implemented basic water point supplies, hand-dug wells with hand pumps and on-spot spring protections. Many of ...