Haku
Viitteet 21-30 / 413
Virtausten mallintaminen konformikuvauksen avulla
(2015)
Diplomityö
Diplomityö
Tämän diplomityön tarkoituksena on tutkia kompleksifunktioita ja konformikuvauksia sekä niiden soveltuvuutta virtauksien mallintamiseen.
Ensimmäisessä luvussa tarkastellaan aluksi kompleksifunktioita yleisesti ja käydään ...
Transparent Indium Tin Oxide Microelectrode Arrays for Measuring Beating Cardiomyocytes
(2016)
Diplomityö
Diplomityö
This thesis study was made, to develop the microfabrication process for transparent microelectrode arrays (MEAs) using indium tin oxide (ITO). This was done in order to measure bioelectrical data from cardiomyocytes (CMs), ...
Paineviemärin energia- ja kustannustehokkuuden kehittäminen
(2016)
Diplomityö
Diplomityö
Kasvava energiankulutus ja ilmastonmuutos ovat johtaneet lainsäädännöllisiin muutoksiin, jotka lisäävät vesihuoltolaitoksiin kohdistuvia paineita energiatehokkuuden kehittämiseksi. Kiristyneen taloudellisen tilanteen vuoksi ...
Synthesis of Biodegradable and Biocompatible Polymers for Drug Delivery Applications
(2016)
Diplomityö
Diplomityö
Many polymers, like PLA and PCL, are known to be biodegradable, but the long degradation time have limited their use for drug delivery applications. PLGA 50:50 has been proved to be the most efficiently biodegradable ...
Cone-Beam Computed Tomography Examinations of the Head and Neck Region in Finland: Indications and Patient Radiation Dose
(2016)
Diplomityö
Diplomityö
Diagnostic reference levels (DRLs) are pre-determined dose levels employed for patient dose management in diagnostic radiology. Cone-beam computed tomography (CBCT) has gained significant popularity in the imaging of the ...
Fabrication of Vanadium Oxide Nanoparticles by Pulsed Laser Ablation
(2015)
Diplomityö
Diplomityö
Pulsed laser ablation in liquid (PLAL) is an eco-friendly nanoparticles fabrication technique. PLAL uses laser light to ablate a solid material which is submerged in a liquid medium. During the interaction of laser light ...
Biomassaa polttavan kerrosleijukattilan tulipesän kuonaantumisen mallintaminen
(2013)
Diplomityö
Diplomityö
Tuhkan sulaminen ja tulipesän seinille osuvien tahmeiden tuhkapartikkelien aiheuttama kuonaantuminen synnyttävät ongelmia polttoprosesseissa. Seinillä olevat kerrostumat huonontavat lämmönsiirtoa, aiheuttavat korroosiota ...
Intracellular Lipid Production from Lignin Model Monomers by Acinetobacter baylyi ADP1
(2016)
Diplomityö
Diplomityö
Lignin is a complex aromatic polymer consisting of phenylpropanoid units (C9 units), which, together with cellulose and hemicellulose, is the major component of lignocellulosic biomass. The cellulose and hemicellulose are ...
Advanced pulsed and long-wavelength semiconductor lasers based on quantum-dot and antimonide materials
(2014)
Diplomityö
Diplomityö
In this thesis mid-infrared optically-pumped semiconductor disk laser (OP-SDL) emitting at 2.5 µm is developed for the very first time. Although laser diodes at this wavelength have already been reported, the motivation of ...
Hypermediajärjestelmän muutoshallinta ja haasteet offshore-projektissa
(2013)
Diplomityö
Diplomityö
Hypermediajärjestelmien monimutkaistuessa ja toimitusmallien hajautuessa muutoshallinnan merkitys hypermedia- ja ohjelmistoalalla on kasvanut. Prosessi- ja toimitusmalleista riippumatta muutoshallinnan tarkoitus on varmistaa, ...