Haku
Viitteet 11-20 / 199
Synthesis of Biodegradable and Biocompatible Polymers for Drug Delivery Applications
(2016)
Diplomityö
Diplomityö
Many polymers, like PLA and PCL, are known to be biodegradable, but the long degradation time have limited their use for drug delivery applications. PLGA 50:50 has been proved to be the most efficiently biodegradable ...
Cone-Beam Computed Tomography Examinations of the Head and Neck Region in Finland: Indications and Patient Radiation Dose
(2016)
Diplomityö
Diplomityö
Diagnostic reference levels (DRLs) are pre-determined dose levels employed for patient dose management in diagnostic radiology. Cone-beam computed tomography (CBCT) has gained significant popularity in the imaging of the ...
Fabrication of Vanadium Oxide Nanoparticles by Pulsed Laser Ablation
(2015)
Diplomityö
Diplomityö
Pulsed laser ablation in liquid (PLAL) is an eco-friendly nanoparticles fabrication technique. PLAL uses laser light to ablate a solid material which is submerged in a liquid medium. During the interaction of laser light ...
Intracellular Lipid Production from Lignin Model Monomers by Acinetobacter baylyi ADP1
(2016)
Diplomityö
Diplomityö
Lignin is a complex aromatic polymer consisting of phenylpropanoid units (C9 units), which, together with cellulose and hemicellulose, is the major component of lignocellulosic biomass. The cellulose and hemicellulose are ...
Advanced pulsed and long-wavelength semiconductor lasers based on quantum-dot and antimonide materials
(2014)
Diplomityö
Diplomityö
In this thesis mid-infrared optically-pumped semiconductor disk laser (OP-SDL) emitting at 2.5 µm is developed for the very first time. Although laser diodes at this wavelength have already been reported, the motivation of ...
Impact of magnesium and strontium on dissolution and sintering of bioactive borosilicate glasses
(2016)
Diplomityö
Diplomityö
Bioactive glasses are a promising, relatively new material group to be utilized in regenerative medicine. The main target area of these materials is in bone tissue engineering, where commercial products are already used; ...
Integer Linear Programming Based Code Generation for Exposed Datapath
(2014)
Diplomityö
Diplomityö
As the use of embedded processors has spread throughout the society pervasively, the requirements for the processors have become much more diverse causing general purpose processors to be inefficient on many occasions. ...
Requirement Specification for Station Blackout Gas Turbine Generator in a Nuclear Power Plant
(2013)
Diplomityö
Diplomityö
The ultimate purpose of nuclear power plant safety systems is to prevent damage to the reactor and the possible release of radioactive materials into the surroundings following an internal or external event that interrupts ...
Characterization of a Downdraft Gasifier Fueled by Bamboo - A Pilot Project in Mexico
(2015)
Diplomityö
Diplomityö
Biomass gasification is a promising technology for using local feedstock to produce synthesis gas that can be applied for electricity production. Different biomasses can be utilized for the process and this study concentrates ...
Immobilization of Arsenic through pH Control during Bioleaching of Nickel Flotation Concentrate
(2013)
Diplomityö
Diplomityö
Bioleaching is a biohydrometallurgical method that utilizes the ability of acidophilic microorganisms such as Acidithiobacillus ferrooxidans, At. caldus, or Leptospirillum ferrooxidans to oxidize mineral sulfides, iron and ...