Haku
Viitteet 1-4 / 4
Test report, end plate joints of steel tubes, strong axis bending
(Tampere University of Technology, 2010)
- report
The most novel European standards for the design of steel EN 1993-1-8 (2005) and aluminum EN 1999-1-1 (2007) joints includes the component method to define the stiffness and to check ductility and resistance of different ...
Composite column - Calculation examples
(Tampere University of Technology, 2010)
- report
Composite columns are often used in structures due to the ease and speed of erection, and high performance in fire situation. Concrete filled tubes are steel tubes that are in site filled with reinforced concrete. In normal ...
Optimization of Planar Tubular Truss with Eccentric Joint Modelling
(Tampere University of Technology, 2012)
- report
Tubular trusses are used in construction due to their low weight and ease of manufacturing. Compared to trusses made of I-sections, they have a relatively small painting area and do not require stiffeners at connections.
The ...
Test Report, End Plate Joints of Steel Tubes, Biaxial and Weak Axis bending
(Tampereen teknillinen yliopisto, 2011)
- report
This report describes a series of twelve tests on splice joints of tubular beams with cold formed rectangular hollow steel sections. The splices were assembled by bolted flange plate joints (or extended end plate joints). ...