In recent years companies have put more effort to developing their product documentation processes. One reason is shortened time-to-market cycles and increase of the more complex products on markets. Companies are turning ...

This thesis involved the study of the hydrostatic-mechanical power split CVT technology. Based on the theoretical model, the steady state characteristics were studied to display the advantage and disadvantage of this ...

Protection of environment and human health is major concern for European Union. European Commission has established integrated pollution prevention and control directive and directives concerning large combustion plants ...

Automation software is produced by Finnish companies from various sectors of industry, including processing, electronics and forest machinery industries. This thesis is part of the Research and development environment for ...

During the last two decades, Ethernet has become the de facto standard in office level networks. There are several motivations for using Ethernet also in control networks, including the abundance of low cost components, ...

This Master of Science thesis studies the energy harvesting in vehicle suspension. The aim of this work is to implement an efficient energy harvesting system without disturbing driver’s comfort. This thesis analyzes the ...

De-icing chemicals are spread on the runways to prevent the formation of ice and snow. Formerly used urea, which causes environmental concerns, has been replaced by mainly potassium formate and potassium acetate based ...

The increasing importance of condition monitoring in the manufacturing industry has prompted many new developments in the area. While some have focused on different ways of processing monitored data, few have touched the ...

The objective of this thesis was to study total consistency and ash consistency disturbances caused by disc filter and controlling of these disturbances. Stable thick stock mass flow is important in papermaking process and ...

This work was carried out at the Mechanics and Design Department of Tampere University of Technology. The primary purpose was to develop a real-time environment for a mobile machine. The thesis describes the process of the ...