Haku
Viitteet 11-20 / 50
An Oil Flow Monitoring System Based on Web Services
(2010)
Diplomityö
Diplomityö
The increasing importance of condition monitoring in the manufacturing industry has prompted many new developments in the area. While some have focused on different ways of processing monitored data, few have touched the ...
Consistency disturbances due to disc filter and their control
(2010)
Diplomityö
Diplomityö
The objective of this thesis was to study total consistency and ash consistency disturbances caused by disc filter and controlling of these disturbances. Stable thick stock mass flow is important in papermaking process and ...
Lisätyn todellisuuden hyödyntäminen suunnittelukatselmoinnissa
(2011)
Diplomityö
Diplomityö
Globaali kilpailu on aiheuttanut suuria paineita koneiden ja laitteiden tuotekehityksen nopeutumiselle. Samalla tuotteisiin kohdistuvat vaatimukset lisääntyvät, jolloin tuotteeseen vaikuttavista asioista on yhä tärkeämpää ...
3D-ohjelmistot vaatetusteollisuudessa
(2010)
Diplomityö
Diplomityö
3D-lyhennyksellä viitataan useimmiten tietokonegrafiikkaan, jossa pyritään realistiseen kolmiulotteiseen perspektiiviin ja joka on toteutettu tähän tarkoitukseen tehdyillä erityisohjelmistoilla. Kankaat ovat pehmeitä ja ...
Strategic Agility in Production Networks
(2010)
Diplomityö
Diplomityö
Diplomityö on tehty StrAgile (Strategisesti ketterät tuotantoverkot)-tutkimusprojektiin tiiviisti liittyen. Projekti on Tekes-rahoitteinen ja osa Tuotantokonseptit-ohjelmaa. Projektin pääpainopiste on asiakas- ja ...
Sylinterikuivatuksen tehostaminen
(2010)
Diplomityö
Diplomityö
Pääasiallisin kuivatusmenetelmä paperinvalmistuksessa on sylinterikuivatus. Paineistetulla höyryllä lämmitettävät valurautaiset kuivatussylinterit eivät kuitenkaan ole kuivatusteholtaan riittäviä nykyisien paperikoneiden ...
Hydrostatic-Mechanical Power Split CVT
(2011)
Diplomityö
Diplomityö
This thesis involved the study of the hydrostatic-mechanical power split CVT technology. Based on the theoretical model, the steady state characteristics were studied to display the advantage and disadvantage of this ...
Framework for Integrating Offshore Design Offices
(2010)
Diplomityö
Diplomityö
The goal of this Master’s thesis was to find an integration framework and process between Cargotec Tampere’s main design office and locally situated design offices. The problem had been that there was no defined process ...
Oil Induced Swelling in Thermoelastic Materials
(2010)
Diplomityö
Diplomityö
The purpose of this thesis was to find a new gasket material to be used in frequency converters manufactured by ABB. The new material has to comply to RoHS directive, because this material is going to replace the currently ...
Optically induced electric fields and their use in microfluidics and cell manipulation applications
(2010)
Diplomityö
Diplomityö
This thesis is a part of OPTIMI (Optically actuated microfluidics) project supported by Academy of Finland. The participants of the project were Tampere University of Technology (TUT) and Helsinki University of Technology ...