Haku
Viitteet 1-9 / 9
Consistency disturbances due to disc filter and their control
(2010)
Diplomityö
Diplomityö
The objective of this thesis was to study total consistency and ash consistency disturbances caused by disc filter and controlling of these disturbances. Stable thick stock mass flow is important in papermaking process and ...
Strategic Agility in Production Networks
(2010)
Diplomityö
Diplomityö
Diplomityö on tehty StrAgile (Strategisesti ketterät tuotantoverkot)-tutkimusprojektiin tiiviisti liittyen. Projekti on Tekes-rahoitteinen ja osa Tuotantokonseptit-ohjelmaa. Projektin pääpainopiste on asiakas- ja ...
Optically induced electric fields and their use in microfluidics and cell manipulation applications
(2010)
Diplomityö
Diplomityö
This thesis is a part of OPTIMI (Optically actuated microfluidics) project supported by Academy of Finland. The participants of the project were Tampere University of Technology (TUT) and Helsinki University of Technology ...
Estimation of Injection Volume in Capillary Microinjection Using Electrical Impedance Measurement
(2010)
Diplomityö
Diplomityö
Capillary pressure microinjection (CPM) is a tool for transporting small sample volumes into living cells utilizing a sharp glass pipette and pressure pulses. The automation level of the current state-of-the-art microinjection ...
Real-time industrial Ethernet in machine automation systems
(2010)
Diplomityö
Diplomityö
During the last two decades, Ethernet has become the de facto standard in office level networks. There are several motivations for using Ethernet also in control networks, including the abundance of low cost components, ...
Application of an Industrial Robot in Master-Slave Teleoperation with Haptic Interface
(2010)
Diplomityö
Diplomityö
The implementation of a master-slave teleoperation system as a technique to perform complex tasks in hazardous environments has been in use for several decades. The results of previous systems developed in the nuclear ...
Planning tools for MPLS networks
(2010)
Diplomityö
Diplomityö
Verkot, joissa MPLS-tekniikkaa (Multi Protocol Label Switching) käytetään pakettien reitittämiseen, kasvavat jatkuvasti yhä suuremmiksi ja toiminnallisuus, jota verkoissa tarvitaan, monipuolistuu koko ajan. Tämän syyn ...
Emission monitoring authority requirements at power plants in EU
(2010)
Diplomityö
Diplomityö
Protection of environment and human health is major concern for European Union. European Commission has established integrated pollution prevention and control directive and directives concerning large combustion plants ...
Online Markerless Augmented Reality for Remote Handling System in Bad Viewing Conditions
(2010)
Diplomityö
Diplomityö
This thesis studies the development of Augmented Reality (AR) used in ITER mock-up remote handling environment. An important goal for employing an AR system is three-dimensional mapping of scene that provides the environmental ...