Haku
Viitteet 1-8 / 8
Landowners’ willingness to promote bioenergy production on wasteland − future impact on land use of cutaway peatlands
(2017-12-01)
- article
Landowners are the key players in bioenergy production on wasteland; such as cutaway peatlands. In this study, the landowner's interest to use cutaway peatlands for bioenergy production was investigated using a survey and ...
Numerical modeling of fine particle and deposit formation in a recovery boiler
(2014-08-01)
- article
In kraft pulp mills, black liquor is concentrated and burned in recovery boilers to produce steam and power and to recover pulping chemicals. Black liquor contains a large amount of alkali compounds, which form ash with ...
Microstructure-property relationships of novel ultra-high strength press hardening steels
(2019)
- article
The industrial significance of microalloyed martensitic steels manufactured via cold rolling, reaustenitization, and quenching has been typically recognized as low. However, it is currently believed that microalloying can ...
UV-Blocking Synthetic Biopolymer from Biomass-Based Bifuran Diester and Ethylene Glycol
(2018-02-21)
- article
A furan-based synthetic biopolymer composed of a bifuran monomer and ethylene glycol was synthesized through melt polycondensation, and the resulting polyester was found to have promising thermal and mechanical properties. ...
Coaxial Wire Laser-based Additive Manufacturing of AA7075 with TiC Nanoparticles
(IOP Publishing, 2023-12-22)
- conferenceObject
Reliability evaluation of CAN-bus connectors with tailored testing
(2023-07-20)
- article
Controller Area Network (CAN-bus) is a default solution for digital control in machinery. The CAN-bus structure uses connector components to extend cabling and join subsystems. The connectors are IP-classified, so they ...
Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings
(ASM International, 2023-05-22)
- conferenceObject
Cold spray (CS) technology has proven an enormous potential in the production of composite coatings, enabling a production of materials with superior qualities such as enhanced tribological behavior. This study aims to ...
Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods
(Elsevier, 2023)
- conferenceObject
An analytical plate bending model is used in a novel measurement method that is being developed for feedback control of material properties in paper manufacturing. The model involves an efficient material model for paper ...