Haku
Viitteet 1-8 / 8
Silica-Polypropylene Nanocomposites for Film Capacitors: Structure–Property Studies and the Role of Biaxial Stretching Conditions
(Nordic Insulation Symposium, 2019-08-08)
- conferenceObject
Biaxial-stretching-induced morphology development and dielectric properties of hydrophobic fumed silica-BOPP nanocomposite films were investigated. The precursor (cast) film morphology, pre-heating as well as biaxial ...
Solution Modified Fumed Silica and Its Effect on Charge Trapping Behavior of PP/POE/Silica Nanodielectrics
(Nordic Insulation Symposium, 2019-08-08)
- conferenceObject
Various dielectric nanocomposite materials are studied in the frame of the European Commission funded project GRIDABLE. This project has the aim to develop DC cable extruded insulation and medium and low voltage DC capacitor ...
Surface Modification of Fumed Silica by Dry Silanization for PP/POE-based Dielectric Nanocomposites
(Nordic Insulation Symposium, 2019-08-05)
- conferenceObject
A systematic study of the influence of surface modification of nanosilica with coupling agents having different polarities on the dielectric properties of a PP/POE/silica blend was performed. The main goal of this investigation ...
Engineering and Characterization of Bacterial Nanocellulose Films as Low Cost and Flexible Sensor Material
(2017)
- article
Some bacterial strains such as Komagataeibacter xylinus are able to produce cellulose as an extracellular matrix. In comparison to wood-based cellulose, bacterial cellulose (BC) holds interesting properties such as ...
Nanocomposite Polypropylene For DC Cables And Capacitors: A New European Project
(IEEE, 2017-09-15)
- conferenceObject
This paper presents the scientific background of a new European project, GRIDABLE, which was launched at the beginning of 2017 and has to deliver results in manufacturing and characterization of LV-MV capacitors and MV-HV ...
Dispenser system for nanocellulose 3D printing
(Suomen Automaatioseura, 2017)
- conferenceObject
A 3D-printed stepper motor dispenser assembly for a 10ml plastic syringe was constructed. This dispenser assembly was used to run a set of calibration experiments to evaluate its suitability to dose nanocellulose mass. The ...
Pyrolysed cellulose nanofibrils and dandelion pappus in supercapacitor application
(2017)
- article
Dandelion pappus and wood based nanocellulose fibrils were combined to form films that were subsequently pyrolyzed under low-pressure conditions in a carbon monoxide (CO) rich atmosphere to make supercapacitor electrode ...
From Laboratory to Industrial Scale : Comparison of Short- and Long-Term Dielectric Performance of Silica-Polypropylene Capacitor Films
(IEEE, 2020)
- conferenceObject
In this paper a route from laboratory scale samples to full industrial scale production of biaxially oriented silica-PP nanocomposite capacitor films is for the first time shown and verified. Morphological and dielectric ...