Trepo - Selaus tekijän mukaan "Kallio, P."
Viitteet 1-8 / 8
-
3D interfacial debonding during microbond testing: Advantages of local strain recording
(10.04.2020)
articleThe microbond (MB) test is the most widely adopted micromechanical test to characterize fibre matrix interfaces but typically lacks reliability and output for determining multi-parameter interface models. In the current ... -
Effect of graphene oxide surface treatment on the interfacial adhesion and the tensile performance of flax epoxy composites
(03 / 2021)
articleThe high stiffness and damping properties of flax fibres promote the integration of biocomposites in structural applications. However, the strength of flax/epoxy composites is still limited compared to glass/epoxy composites. ... -
Experimental and numerical dataset of Microbond test using optical fibres for strain
(13.07.2020)
articleThis data article provides useful information often required for numerical modeling of the so-called microbond tests. It includes the experimental and simulation data of the microbond testing using Fibre Bragg Grating (FBG) ... -
Identification and compensation of error sources in the microbond test utilising a reliable high-throughput device
(10 / 2020)
articleThis paper addresses the issue of high scatter in microbond test results. Implementation of the test is discussed and the reliability of a state-of-the-art test system is analysed through characterisation of the critical ... -
Microelectrode array for noninvasive analysis of cardiomyocytes at the single-cell level
(2018)
article<p>Microelectrode arrays (MEAs) are widely used to assess the electrophysiology of human pluripotent stem cell-derived cardiomyocytes (hPS-CMs). Traditionally, MEAs have been used to record data at the cell population ... -
Modeling carbon dioxide transport in PDMS-based microfluidic cell culture devices
(01.12.2015)
article<p>Maintaining a proper pH level is crucial for successful cell culturing. Mammalian cells are commonly cultured in incubators, where the cell culture medium is saturated with a mixture of air and 5% carbon dioxide ... -
Modulating impact resistance of flax epoxy composites with thermoplastic interfacial toughening
(2021)
articleThe application of natural flax fibre/epoxy composites is growing in the automotive sector due to their good stiffness and damping properties. However, the impact damage resistance of flax/epoxy composites is limited due ... -
A Portable Microscale Cell Culture System with Indirect Temperature Control
(2018)
article<p>A physiologically relevant environment is essential for successful long-term cell culturing in vitro. Precise control of temperature, one of the most crucial environmental parameters in cell cultures, increases ...
